Proactively detect risks and hazards
in dynamic Oil & Gas environments
Oil and gas operations change by the second.
Quantum RTLS® captures the 3D location and movement of workers, vehicles, equipment, and active safety boundaries with 1.5 mm accuracy in real time.
That precision matters when the difference between safe and unsafe can be a physical boundary, the path of a moving load, or the distance between a worker and operating equipment. Instead of relying on approximate location and oversized safety buffers, this ground-truth spatial data enables teams to detect restricted-zone entry, unsafe proximity, and person-down events with unmatched precision.
1.5 mm
3D positioning accuracy
20 Hz
Low-latency position updates
Class 1, Division 1
Certified for hazardous locations
Vibration + Audio + LED
Direct worker alerts
1.5 mm
Precision
3D positioning accuracy
20 Hz
Frequency
Low-latency position updates
Class 1,
Division 1
Certified for hazardous locations
Vibration +
Audio + LED
Direct worker alerts
For industrial safety, “nearby” is not enough
Unlike Ultra-Wideband technologies, cameras, and other tracking solutions, Quantum RTLS® delivers the precision required for safety rules to reflect the actual hazard, not an approximation of it.
Workers receive immediate audible, haptic, and visual alerts through intrinsically safe wearable badges, while operators and safety teams gain the visibility they need to respond faster and maintain accountability across the site.
Precise exclusion zones
Match virtual boundaries to the real geometry of equipment, walkways, openings and restricted areas.
Trusted alerts
Reduce unnecessary alarms caused by oversized safety buffers while reliably detecting actual boundary crossings.
Close-proximity detection
Continuously monitor the exact separation between workers, vehicles, cranes, tools and moving equipment.
Dynamic hazards
Maintain precise safety boundaries around temporary work areas, changing operations, and moving loads.
For industrial safety, “nearby” is not enough
QTM-HAS10 Anchor
QTM-HMC10 Mobile
QTM-HAS10
Provides the fixed positioning reference used to locate workers and equipment with millimeter-level accuracy
- Up to 12 months of battery-powered operation
- Up to 20 m ultrasonic measurement range
- Up to 50 m RF communication range
- Wireless mesh networking
- Automated network calibration
- Wall, ceiling or structural mounting
QTM-HMC10
A business-card-sized worker safety device designed to integrate with standard work uniforms.
- Up to 1.5 mm 3D positioning accuracy
- Maintains a continuous position update rate of 20 Hz
- Vibration motor
- Configurable audible alarm
- High-visibility LED alert
- RSSI and IMU sensor fusion
- Configurable zone and minimum-distance rules
QTM-HAS10 — Battery-Powered Anchor
Provides the fixed positioning reference used to locate workers and equipment with millimeter-level accuracy.
- Up to 12 months of battery-powered operation
- Up to 20 m ultrasonic measurement range
- Up to 50 m RF communication range
- Wireless mesh networking
- Automated network calibration
- Wall, ceiling or structural mounting
QTM-HMC10 — Wearable Tracker
A business-card-sized worker safety device designed to integrate with standard work uniform.
- Up to 1.5 mm 3D positioning accuracy
- Position updates at rates up to 20 Hz
- Vibration motor
- Configurable audible alarm
- High-visibility LED alert
- RSSI and IMU sensor fusion
- Configurable zone and minimum-distance rules
Dynamic safety workflows
Oil and gas safety cannot be reduced to permanent red boxes on a floor plan. The same area may be open during normal operation, restricted during maintenance and accessible only to qualified personnel during a specific task.
Dynamic Safety Workflows
Permit-Based Whitelisting
Authorize specific workers, roles or crews to enter a zone only while the relevant permit or task is active. Everyone else receives an immediate warning before or as the boundary is crossed.
Dynamic Lift and Load Zones
Activate a precise exclusion zone around a crane, suspended load or active lift path. Update the boundary as the operation changes, then automatically clear it when the lift is complete.
Equipment-State Safety Rules
Change worker separation requirements based on whether equipment is stopped, energized, moving or performing a specific operation.
Non-Routine Operations
Rapidly configure protection around line breaks, confined-space work, hot work, temporary openings, shutdown activities and maintenance events. When the work front moves, the safety configuration moves with it.
Immediate alerts for workers. Complete visibility for the team.
Detect the Risk
Quantum RTLS continuously measures the precise 3D position of workers, equipment and active safety boundaries.
Alert the Worker
The QTM-HMC10 responds through vibration, an audible alarm and a visible LED. Low-latency, millimeter-level detection ties the alert to the actual hazard boundary.
Inform the Operator
Safety teams see covered personnel in real time. Equipment operators gain visibility into workers obscured by machinery, structures or blind spots.
Create a Verifiable Record
Every detected event is recorded with its location, time, duration, involved personnel and operational context for incident review, reporting and continuous improvement.
Not another RTLS technology
RF-only positioning
- Accuracy changes around reflective metal infrastructure
- Signal maps become unreliable as the site changes
- Position uncertainty creates missed events or excessive alarms
- Coarse accuracy limits close-proximity safety applications
VS
Quantum RTLS®
- Uses ultrasonic time-of-flight as its precision measurement layer
- Delivers 1.5 mm 3D positioning accuracy & position update rates of 20 Hz
- Combines ultrasonic, RF, and inertial sensing technologies for resilient positioning
- Supports precise zone and minimum-distance rules
Bring millimeter-level safety intelligence to your operation
Protect workers with immediate wearable alerts. Give operators and safety teams a live view of personnel and hazards. Adapt safety rules and permissions as quickly as the work itself changes.
Quantum RTLS provides the ground-truth positioning data, while OmniVisor AI™ transforms that data into deeper operational intelligence. This combined solution brings worker protection, operational visibility and AI-driven site intelligence together in one intrinsically safe platform.
Bring millimeter-level safety intelligence to your operation.
Book a Sales Call
Book a Sales Call
We’re excited to see how we can help your business grow. Please fill out the form, and our team will reach out promptly.
Indoor Positioning
System
Want More Info?
Download Our White Paper
ZeroKey’s Quantum RTLS technology is backed by more than thirty patents and extensive research and development! Want to learn why we’re the most accurate RTLS technology in the market? Read all about it in our white paper.
Want More Info?
Download Our White Paper
ZeroKey’s Quantum RTLS technology is backed by more than thirty patents and extensive research and development! Want to learn why we’re the most accurate RTLS technology in the market? Read all about it in our white paper.
CALGARY
HEAD OFFICE
3120 – 12 St. NE
Calgary, Alberta T2E 8T3
RESOURCES
SITE MAP
Products
Starter Kit
Start Kit Resources
Quantum RTLS
Spatial Intelligence Platform
Solutions
AGV Guidance & Navigation
Bolt Sequencing
Collision Avoidance
Humanoid Robots
Material Tracking
Operational Visibility
Smart Manufacturing
Time & Motion Study
Warehouse Intelligence
Worker Safety Solutions
Workflow Tracking
CALGARY
HEAD OFFICE
3120 – 12 St. NE
Calgary, Alberta T2E 8T3
